After DTF pet film printing , the Pattern Loses Powder?

After DTF pet film printing , the Pattern Loses Powder?

Blog Article

After DTF pet film printing, what have to I do if the sample delaminates, is now not fine, feels dry and does now not adhere? This ought to be a trouble that many clients have experienced. However, the purpose of most issues is no longer awful ink, however these important points in the printing system are no longer executed well!
Whether the printing ink extent fits the curing parameter setting
Too excessive ink extent will purpose the surface of the sample to fail to entirely cure, and it is handy to bubble or delaminate at some point of subsequent warm pressing; unsuitable printing parameter settings are one of the frequent reasons of sample powder loss and delaminate.

Solution:

Optimize the ink volume: According to the complexity of the sample and the fabric properties, alter the ink quantity to make certain that the ink can completely cowl the pattern. Tips: It is advocated to do 2~3 small pattern checks earlier than beginning the computer to affirm that the DTF T-shirt Printing nation is stable.

Is the stacking order of DTF transfer ink and colour ink correct?
The order of ink layers impacts the sample forming impact and adhesion performance. Solution 1. The right order need to be: white ink for base → coloration ink for coloring two Optimize printing parameters (1) White ink thickness: Ensure that the thickness of white ink is moderate. If the white ink is too thin, the sample will no longer be in a position to cowl the color. If the white ink is too thick, it will now not dry easily. It is generally endorsed to be between 20 and 30 microns. (2) Color ink thickness: The thickness of coloration ink is normally between 10 and 20 microns. Ensuring shiny colorations and wealthy details.

Whether the warmness urgent time, temperature and strain settings are accurate
Improper warmth urgent manage immediately impacts whether the sample can be firmly connected to the clothes.

Solution 1. The precise time wishes to be adjusted in accordance to the fabric and the complexity of the pattern. two Adjust the warmness urgent pressure: Ensure that the warmness urgent strain is moderate. Tips: It is advocated to document the great parameters for every movie cloth to keep away from arbitrary changes that have an effect on stability. If the movie cloth thickness is extraordinary or the computer energy is different, the parameters must be fine-tuned appropriately.

Is the DTF PET movie used appropriate for the cutting-edge process?
Good ink + properly pattern, if it is matched with inferior movie material, it is nonetheless convenient to peel off! Its first-class and adaptability immediately have an effect on the adhesion and sturdiness of the pattern. The fantastic of PET videos on the market varies. Some videos have inadequate temperature resistance and susceptible peeling force. If the coating great of the switch movie is bad or uneven, it may additionally reason the sample to fail to adhere firmly at some stage in the warm urgent process.